MF Model
Body Material ST-37 / AISI 316L / AISI 304 L
Screen Material AISI 304L , PRGF
Maximum Working Pressure 10 bar (145 Psi) (optionally up to 25 bars (360 psi)
Maximum Output Pressure 1 bar (15 Psi)
Maximum Working Tempreture 60 ⁰ C (140 F)
Back Flushing Type Pressure Differantial
Back Flush Control System Semi Automatic Manual
Filtration Degree 20-2000 micron (µ
Painting Method Electrostratic Powder Cotaing
Paint Material Epoxy Polyester
  1. The filter body is St-37 or stainless-steel optionality
  2. The filtering in pressured lines
  3. High performance during the back washing
  4. Extensive Filtering Surface
  5. Easy-to assembly and fitler components, not required to change
  6. 100% back washing performance
  7. The back washing time for 50-30 sec.
  8. Working opportunity, not required additional energy
  9. The minimum head and water loss

Technical Specification

CODE INLET/OUTLET A B L1 L D F DRAINAGE FLOW FLOW FILTER SURFACE AREA NOZZLE SIEVE WEIGHT
inch DN mm inch m³/h cm² pieces kg
MF102  CMF102 2 50 390 270 365 910 10 2 12 40 1317 2 2 36         30
MF1025  CMF1025 65 390 270 365 910 10 2 12 50 1317 2 2 37           31
MF103  CMF103 3 80 440 270 465 1010 10 2 18 70 1975 3 3 41          35
MF104  CMF104 4 100 580 270 570 1115 10 2 24 120 2634 4 4 48          42
MF105  CMF105 5 125 680 287 770 1315 10 2 18 150 3951 3 6 57         50
MF106  CMF106 6 150 780 287 970 1515 10 2 24 180 5268 4 8 67           60
MF106S  CMF106S 6 150 880 287 1170 1715 10 2 30 220 6585 5 10 75          68
MF128  CMF128 8 200 870 312 1150 1695 12 2 30 320 6585 5 10 115         104
MF128S CMF128S 8 200 985 312 1385 1930 12 2 36 340 7902 6 12 127       114

Working Principle

Water passes to part which include multiplex filter (1). It is protected with a rouhgh material with screen over of multiplex screen.(3)The thin filter goes to output collector side(2). Particles,collected on multiplex screen,constitute a pollution layer over of the filter and a pressure difference in the outside collector. The filter cleaning and back washing is made with turnig manual arm to right –left (5) and during  this process, a back washing flow forms to the atmosphere (6) with the opening of decharge valve. This flow cleans particle volution together, obtains the absorbing whole filter surface by vacuum nozzles.(4)
This process continues until input and output pressures will balanced.
During the back washing,the filtration process continues.