HurricaneFilt Single Filter Systems

Hurricanefilt is a kind of screen filter.Particles accumulate on the inner screensurface when the water passes throughthe screen. These particles are cleanedby water vortex during filtration. This vortex remove the particles from the screen surfaceduring filtration and supports backwash operation. Hurricanefilt has a vortex flow. This vortex flow occurs thanks to the helix at the inlet part. Particles on the screen surface are swept and conveyed to the drain by vortex flow. Particles accumulate in front of the drain. When the backwash starts, the particles are drained from filter immediately.

Technicial Specifications

Body Material: PA6GFR30
Sieve Material: AISI316 + PP
Collector Material: S195T - AISI 304 - AISI 316
Maximum Working Pressure: 8 Bar (116 PSI)
Minimum Working Pressure: 1 Bar (14.5 PSI)
Maximum Operating Temperature: 60 °C (140 °F)
Backwash Operation Criteria: Pressure Difference
Backwash Control Unit: Electronic
Filtration Degree: 20 - 200 micron (µ)

CODE D Flow Rate Filtration Area
Inch DN m³/h GPM(US) cm²
1XHP-A2 2    50 20-25 88-110 1140
1XHP-SA2
1XHPS-A2 2    50 25-35 110-154 1520
1XHPS-SA2
1XHP-A25 2 1/2 65 25-35 110-154 1140
1XHP-SA25
1XHPS-A25 2 1/2 65 25-40 110-176 1520
1XHPS-SA25
1XHP-A3 3    80 30-40 132-176 1140
1XHP-SA3
1XHPS-A3 3    80 30-50 132-220 1520
1XHPS-SA3
1XHD-A3 3    80 40-55 176-242 2280
1XHD-SA3
1XHDS-A3 3    80 40-65 176-286 3040
1XHDS-SA3
1XHD-A4 4    100 55-70 242-308 2280
1XHD-SA4
1XHDS-A4 4    100 55-100 242-440 3040
1XHDS-SA4
1XHD-A6 6    150 90-180 396-792 5532
1XHD-SA6
Contact Form
Çerez Kullanımı
Sitemizin, çalışması için çerezler kullanılmaktadır. Site üzerinde kullanılan çerezler hakkında detaylı bilgi almak için Çerez Politikası’nı incelemenizi rica ederiz.
Anladım Çerez Politikası
x