Manual Plastic Single Filters - PE/PD

Aytok PE-PD filters are manually cleaned filters. Almost all of the filter components are made of plastic raw materials. Non-plastic parts are made of stainless steel (AISI304). Therefore, the corrosion resistance of the filters is quite high. It is ensured that the filter performs its duty for years without corrosion.

General Characteristic

Body Material : PA
Cartridge Material: Disc Cartridge(PP), Screen Cartridge (SS 304+PA )
Maximum Working Pressure : 8 Bar (116 PSI)
Maximum Working Temperature: 60 °C/ 140 °F
Filtration Degree: 20-50-100-130 micron

Technical Specifications

CODE	D	M	T	D1	H	K	FLOW	FILTRATION AREA	WEIGHT
CODE	inch			mm			m³/h	cm²	kg
PMD2	2	1/4	3/4	190	500	335	28	868	6
PD2	2	1/4	3/4	190	600	335	33	1302	7
PSD2	2	1/4	3/4	190	750	335	35	1805	8
PD25	2½	1/4	3/4	190	600	335	35	1302	7,1
PSD25	2½	1/4	3/4	190	750	335	40	1805	8,1
PD3	3	1/4	3/4	190	600	335	45	1302	7,2
PSD3	3	1/4	3/4	190	750	335	50	1805	8,2
PME2	2	1/4	3/4	190	500	335	28	868	5,2
PE2	2	1/4	3/4	190	600	335	30	1140	5,4
PSE2	2	1/4	3/4	190	750	335	35	1520	6,3
PE25	2½	1/4	3/4	190	600	335	35	1140	5,5
PSE25	2½	1/4	3/4	190	750	335	40	1520	6,4
PE3	3	1/4	3/4	190	600	335	45	1140	5,6
PSE3	3	1/4	3/4	190	750	335	50	1520	6,5

Working Princible and Washing Operation

The particles coming from water source and entering to the filter, are not allowed to be sent to the filter outlet after being filtered through screen. These particles accumulate on the inner surface of the screen and a dirty layer is formed. This contamination event increases the pressure difference between the inlet and outlet of the filter. The pressure difference between the inlet and outlet is observed manually from the manometers. If the pressure difference increases, the water flow is cut off and the system is stopped. The clamps on the filter are opened and the cover is removed. Then the screen catridge is takenout cleaned bu using pressurized water and reassembled.